Custom Paver Patio Installation & Hardscape Design

A paver patio typically runs $18–$30 per square foot installed, while a standard poured concrete slab costs $8–$15 per square foot. However, pavers deliver significantly better long-term value. They last 25–50 years with minimal maintenance, they're individually replaceable if one cracks, and they add measurably more to your home's resale value. Most of our Alpharetta clients see pavers as the smarter investment once they factor in the lifespan difference and the fact that concrete slabs tend to crack within 5–10 years in Georgia's clay soil.

We use Techniseal HP NextGel polymeric sand in every joint during installation. Once activated with water, it hardens into a flexible seal that blocks weed seeds, prevents ant infestations, and resists washout from Georgia's heavy rain. We also install a high-quality geotextile fabric beneath the base layer to stop weeds from growing up through the sub-base. For existing patios, we offer re-sanding services where we clean out old joint material and apply fresh polymeric sand.

We recommend high-density concrete pavers from Belgard, specifically their Mega-Arbel and Lafitt Rustic Slab lines. These are rated for freeze-thaw cycles, resist fading from UV exposure, and hold up under Georgia's heavy spring rains. For pool decks, we often use travertine because it stays cooler underfoot in summer. After eight years of installing in North Atlanta — from Milton to Roswell to Johns Creek — we've found that Belgard pavers outperform every other brand for durability and color retention.

A standard 300–400 square foot patio takes about 3–5 days from excavation to final compaction. Larger projects with retaining walls, seating walls, or fire pits typically run 5–7 days. We always allow proper curing time for the base layers — rushing that step is the number one reason patios settle or shift. Weather can add a day or two during Georgia's rainy season, but we keep you updated on the timeline throughout the project.

In most cases, yes. The City of Alpharetta and Fulton County have impervious surface limits that apply to patios, driveways, and other hardscapes. If your project exceeds the threshold for your lot size, a land disturbance permit is required. Milton, Roswell, and Johns Creek each have their own requirements as well. We handle all permitting as part of our service — our team knows the local codes inside and out, so you don't have to worry about compliance.

Yes, as long as the existing concrete is structurally sound with no major heaving or cracking. We use either a thin-set adhesive method for a permanent bond or a sand-set overlay with edge restraints. The overlay method adds about 1.5 inches of height, so we check door thresholds, step transitions, and drainage before starting. This approach saves you the cost of demolition and haul-away, and it adds the beauty and durability of pavers over your existing surface.

Pavers are manufactured concrete or clay units with consistent shapes, colors, and thicknesses — they're precision-engineered for uniform installation. Flagstone is natural stone (typically quartzite, bluestone, or sandstone) cut into irregular shapes that give a more organic, rustic look. Pavers are generally more affordable and offer tighter joint lines, while flagstone commands a premium but delivers unmatched natural character. We install both regularly throughout Alpharetta and can help you choose based on your design style and budget.

Very little. We recommend sealing your pavers every 3–5 years to preserve color and protect the polymeric sand in the joints. An annual rinse with a garden hose or light pressure wash keeps them looking sharp. If a single paver chips or stains, you can replace just that one unit without tearing up the whole patio — that's one of the biggest advantages over poured concrete. Our team offers maintenance packages for clients who want hands-off upkeep.